• ReLock 8-Station Vise

    • Baseplates are designed to adapt to many machine table sizes.
    • Vise columns can be located on a pallet using edge locating with shims or spacers (not included).
    Please use the image viewer to see the product line drawing.

  • ReLock 8-Station Vise with Machinable Soft Jaws

    Please use the image viewer to see the product line drawing.

  • ReLock 8-Station Vise with Hard Jaws

    Please use the image viewer to see the product line drawing.

  • 8-Station Vise Packages

    Easy Mounting Instructions for the Single Station
    Conversion Plate on a ReLock 8-Station Vise

    Step 1
    Crank bottom jaw toward center of vise. Mount single station conversion plate to the back carrier jaw as shown.

    Step 2
    Crank bottom jaw down until the single station conversion plate touches baseplate. Mount the single station conversion plate to the baseplate.

    Please use the image viewer to see the product line drawing.

  • ReLock 8-Station Compact Quad

    • Designed for machining center with small work envelopes like the Tsugami FMA3.
    • Through column mounting holes are included to mount directly to the pallet of an HMC without the need for a baseplate.
    • Clamping pressure = 0 to 6,000 lbs.
    • Recommended foot lbs. = 45-50
    • Mounting kit included.
    Please use the image viewer to see the product line drawing.

Copyright © 2019 TE-CO Manufacturing LLC,  All Rights Reserved Site created by Thomas Web Solutions and Powered by Navigator Platform