The purpose of the fixture plate is to provide a staging area to build part fixtures. Basic 3-2-1 fixturing holds true for most CMM fixturing applications, although the clamping force required to fixture parts when inspecting with a CMM is significantly less than what is required for machining. Most CMM fixtures require only light pressure clamping to secure the part in a fixed position. Our soft touch clamps are perfect for clamping in CMM fixturing applications.
  • Alpha numeric grid pattern
  • Black hard coat anodized
  • Custom sizes quoted upon request
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Item #

Length A

Width B

Thickness C

Thread D

Hole Spacing 

List Price

14312 N/A 12.000 in N/A 12.000 in N/A 0.500 in N/A 1/4-20 N/A 1/2" Centers QUOTE
14318 N/A 18.000 in N/A 18.000 in N/A 0.500 in N/A 1/4-20 N/A 1/2" Centers QUOTE
14324 N/A 24.000 in N/A 24.000 in N/A 0.750 in N/A 1/4-20 N/A 1/2" Centers QUOTE
14330 N/A 30.000 in N/A 30.000 in N/A 0.750 in N/A 1/4-20 N/A 1/2" Centers QUOTE
14340 N/A 28.000 in N/A 40.000 in N/A 0.750 in N/A 1/4-20 N/A 1/2" Centers QUOTE
63312 N/A 300.00 mm N/A 300.00 mm N/A 13.00 mm N/A M8 x 1.25 N/A 15 mm QUOTE
63318 N/A 450.00 mm N/A 450.00 mm N/A 13.00 mm N/A M8 x 1.25 N/A 15 mm QUOTE
63324 N/A 600.00 mm N/A 600.00 mm N/A 19.00 mm N/A M8 x 1.25 N/A 15 mm QUOTE
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 
Copyright © 2017 TE-CO, INC,  All Rights Reserved Site created by Thomas Web Solutions and Powered by Navigator Platform