- Positive down force
- Cam action
- Clamp base should be Installed in a slot to retain location
- Mounting screws included
- Available in three sizes
- Clamps can be used in series
- Clamp base provides for higher clamping - height is determined by depth of slot
Unit of Measure
Specifications
Cam Screw |
N/A MB-8 |
Total Distance of Movement |
N/A 0.100 in |
Key Size |
N/A 5/16 |
Mounting Screws |
N/A 3/8-16 x 3/4 LH |
Total Length (A) |
N/A 2.120 in |
Height (B) |
N/A 1.000 in |
Width (C) |
N/A 0.450 in |
| Height (E)1 | N/A 0.110 in |
Hole Spacing (D) |
N/A 1.320 in |
Projection Length (F) |
N/A 1.000 in |
Projection Height |
N/A 0.380 in |
Projection Width (G) |
N/A 0.380 in |
- 1 "E" is the distance needed between the front of the clamp base & the workpiece.
