- Plunger can be completely withdrawn into the body and locked into a retracted position
- Chamfered plunger for easy alignment
- Built in drive wrench for rapid installation and alignment
Unit of Measure
Specifications
Initial End Force |
N/A 0.50 lb |
Final End Force |
N/A 2.50 lb |
Thread Size (A) |
N/A M6x1 |
Body Length (B) |
N/A 1.260 in32.00 mm |
Projection Size (C) |
N/A 0.390 in9.91 mm |
Thread Locking Element |
N/A Yes |
Nose Diameter (D) |
N/A 0.157 in3.9878 mm |
Width Across Flats (E) |
N/A 0.236 in6.00 mm |
Lever Length (F) |
N/A 0.500 in12.70 mm |
Lever Diameter (G) |
N/A 0.093 in2.3622 mm |
Stud Length (H) |
N/A 0.760 in19.30 mm |
Thread Position (I) |
N/A 0 in0 mm |
Body Material |
N/A Stainless Steel |
Type |
N/A Lever Type Plunger |
Weight |
N/A 0.02 lb |
Lock Type |
N/A Yes |
Locking Patch Present |
N/A Yes |
Thread Length |
N/A 0.656 in16.66 mm |
