The PWS-8110 sets the standard for quality.  Featuring the largest opening in its class of eleven inches and a more robust main screw that can handle higher torque loads and transmit higher clamping pressure. An angled slide and locking jaw design to prevent lifting of the moveable jaw, and the four bolt design on the stationary jaw reduces deflection by 25%.
Unit of Measure



N/A Single Station


N/A Machinable Jaws

Clamping Pressure

N/A 12000 lb

Jaw Opening

N/A 11.000 in

Jaw Width

N/A 8.000 in

Total Length

N/A 24.470 in

Total Width

N/A 11.500 in

Total Height

N/A 5.51 in


N/A Ductile Iron


N/A 175 lb


N/A 3.310 in


N/A 0.875 in


N/A 1.075 in


  • Powder coated paint resists flaking and peeling
  • 80,000psi ductile iron body with increased nickel content for improved corrosion resistance
  • Hardened vise bed and jaw plates
  • Sealed and lubricated needle roller thrust bearing for maximum life and minimum torque
  • Up to 12,000lbs. (53,379N) of clamping force
  • Repeatability within .001" (0.025mm)
  • Outside rails of body are machined within 0.0005" (.013mm) square to jaw
  • Bed height matched to size 3.310" +/- 0.0005" (84.07mm +/- .013mm)
  • Footprint and distance from the keyway to stationary jaw meets industry standard
Copyright © 2020 TE-CO Manufacturing LLC,  All Rights Reserved Site created by Thomas Web Solutions and Powered by Navigator Platform