Clamping Kits
clamping-kits-1
Machinist Clamp Kits
(17)- 52-piece Kit Contains:
- 4 Coupling Nuts
- 6 Flange Nuts
- 6 T-Slot Nuts
- 1 T-Slot Cleaner
- 24 Studs – 4 each of:
- English Kits: 3”, 4”, 5”, 6”, 7” and 8” long.
- Metric Kits: 80mm, 110mm, 125mm, 150mm, 175mm and 200mm long. - 6 Step Blocks
- 6 Serrated End Clamps
- 1 Holder
- Bridgeport type milling machines use Item No 20402
Super Clamp Kits
(36)- Kit Contains:
- 6 Step Blocks
- 6 Serrated End Clamps
- 4 Coupling Nuts
- 4 Flange Nuts
- 4 T-Slot Nuts
- 1 T-Slot Cleaner
- 1 Holder (wooden base, metal tray)
- 24 Studs – 4 each of:
- English Kits: 3”, 4”, 5”, 6”, 7” and 8” long.
- Metric Kits:
- Kit No. 68101: 80mm, 110mm, 125mm, 150mm, 175mm and 200mm long.
- Kit No. 68102-06 & 68110-12: 80mm, 110mm, 140mm, 150mm, 175mm and 200mm long.
- Kit No. 68107-08 & 68113-15: 80mm, 110mm, 150mm, 175mm, 200mm and 250mm long.
- Bridgeport type milling machines use Item No. 20206, 20212, 20306 and 20312.
- English Kit is included in the Expanded Clamp Kit.
Expanded Clamp Kits
(9)- Kit Contains:
- 4 Soft Clamps
- 4 Step Clamps
- 6 Plain Clamps
- 4 Coupling Nuts
- 4 T-Slot Nuts
- 1 T-Slot Cleaner
- 6 Step Blocks
- 6 Serrated End Clamps
- 24 Studs with flats – 4 each of 3”, 4”, 5”, 6”, 7” and 8” long.
- 1 holder (wood base w/2 metal holders)
T-Nut & Stud Kits
(27)- Kit Contains:
- 4 Flange Nuts
- 4 Coupling Nuts
- 4 T-Slot Nuts
- 1 T-Slot Cleaner
- 24 Studs - 4 each of:
- English Kits: 3", 4", 5", 6", 7" and 8" long.
- Metric Kits:Kit No. 68201-06: 80mm, 110mm, 140mm, 150mm, 175mm and 200mm long.
Kit No. 58207-09: 80mm, 110mm, 150mm, 175mm, 200mm and 250mm long. - 1 Holder (wooden base, metal tray)
- Bridgeport type milling machines use Item No 20606
- English Kit is included in the Milling Machine Clamp Kit
- Versatility is expanded when used with Step Block & Clamp Kit
Milling Machine Clamp Kits
(13)- Kit Contains:
- 4 Soft Clamps - 6" long
- 4 Coupling Nuts
- 4 Flange Nuts
- 4 T-Slot Nuts
- 1 T-Slot Cleaner
- 24 Studs with flats - 4 each of 3", 4", 5", 6", 7" and 8" long.
- 1 Holder (wooden base, metal tray)
- Bridgeport type milling machines use Item No 20506
- Versatility is expanded when used with Step Block Kit
Punch Press Kits
(10)- Kit Contains:
- 4 Coupling Nuts
- 8 Flange Nuts
- 4 Step Clamps
- 24 Studs - 4 each of 3”, 4”, 5”, 6”, 7” and 8” long.
- 1 Holder
Punch Press Kit shown with clamps (optional).
Jig Bore Kits
- For jig borers and jig grinders
- Will clamp anything within the range of the machine
- Aluminum heel rests prevent marring of the table top surface
- Hex bolts in clamps and coupling nuts allow adjustment of height within the range of the machine
- Clamps, t-bolts, studs, coupling nuts and flange nuts have a black oxide finish
- Includes holder (wooden base, metal tray)
