- Positive down force
- Cam action
- Clamp base should be Installed in a slot to retain location
- Mounting screws included
- Available in three sizes
- Clamps can be used in series
- Clamp base provides for higher clamping - height is determined by depth of slot
Unit of Measure
Specifications
Cam Screw |
N/A MB-6 |
Total Distance of Movement |
N/A 0.050 in |
Key Size |
N/A 3/16 |
Mounting Screws |
N/A 5/16-18 x 3/4 LH |
Total Length (A) |
N/A 1.700 in |
Height (B) |
N/A 0.750 in |
Width (C) |
N/A 0.500 in |
| Height (E)1 | N/A 0.090 in |
Hole Spacing (D) |
N/A 1.000 in |
Projection Length (F) |
N/A 0.750 in |
Projection Height |
N/A 0.250 in |
Projection Width (G) |
N/A 0.250 in |
- 1 "E" is the distance needed between the front of the clamp base & the workpiece.
