- Plunger can be completely withdrawn into the body and locked into a retracted position
- Chamfered plunger for easy alignment
- Built in drive wrench for rapid installation and alignment
Unit of Measure
Specifications
Initial End Force |
N/A 0.75 lb |
Final End Force |
N/A 3.75 lb |
Thread Size (A) |
N/A M10x1.5 |
Body Length (B) |
N/A 2.000 in50.80 mm |
Projection Size (C) |
N/A 0.550 in13.97 mm |
Thread Locking Element |
N/A Yes |
Nose Diameter (D) |
N/A 0.236 in5.9944 mm |
Width Across Flats (E) |
N/A 0.390 in10.00 mm |
Lever Length (F) |
N/A 0.750 in19.00 mm |
Lever Diameter (G) |
N/A 0.141 in3.5814 mm |
Stud Length (H) |
N/A 1.300 in33.02 mm |
Thread Position (I) |
N/A 0.130 in3.30 mm |
Body Material |
N/A Stainless Steel |
Type |
N/A Lever Type Plunger |
Weight |
N/A 0.05 lb |
Lock Type |
N/A Yes |
Locking Patch Present |
N/A Yes |
Thread Length |
N/A 1.170 in29.72 mm |
