• Extensive tapped dowel pin hole configuration provides the flexibility to accurately and quickly fixture practically any workpiece or mount any vise.
  • Fixture plates consist of alternating 1/2" dowel pin holes for workpiece location, along with 1/2" and 3/8" tapped holes for clamping.
  • Can be accurately located on machine tables by utilizing two reamed 5/8" centerline sine key holes.
  • Non-standard sizes and mounting configurations are available and will be quoted upon request - otherwise, mounting holes must me added by the customer.
  • TE-CO supports these products with a full line of tooling components for your fixturing needs.
  • Hoist rings are also available for proper material handling.
Material Tolerances:
  • C1119 Steel or equivalent
  • Blanchard ground flat and parallel to 0.002 in 12"
  • Tapped holes on location + 0.005
  • Dowel holes on location + 0.001
  • All plates are 1.2" thick
Unit of Measure

Specifications

A

N/A 20.000 in

B

N/A 15.000 in

Approx. Weight

N/A 102.00 lb

Type

N/A Fixture Plate

Material

N/A C1119 Steel

Hole Size

N/A 0.501 in

Hole Diameter

N/A 0.501 in

Thickness

N/A 1.200 in